Flat Glass Door Canopy Type: P DDA Act Compliant
£960.32
inc VAT
DDA Glass Door Canopies
Our DDA glass canopies give accessible entrances generous, sheltered cover with a clean, contemporary look. At 1200mm deep, they leave room for wheelchair users and people with mobility aids to approach and open the door out of the rain. Choose from three support styles: Type G, Type K with gallows brackets, and Type P with tie rods. Each is made to measure in the UK. Prefer a lighter option? See our DDA polycarbonate canopies, or the whole DDA range.
3products
£960.32from, inc VAT
1200mmprojections
10mm Safetymost specified
48hrstock dispatch
★ 5.00from 1 review
Flat Glass Door Canopy Type: G DDA Act Compliant
£1,172.84
inc VAT
Flat Glass Door Canopy Type: K DDA Act Compliant
£1,172.84
inc VAT
No products match those filters.
Sized for accessible entrances
Every DDA glass canopy is 1200mm deep, with widths of 1500mm and, on the Type P, 1700mm. That gives a sheltered space in front of the door for wheelchair users, buggies and anyone who needs a moment to get the door open.
Toughened glass, stainless fixings
The canopies use toughened safety glass with stainless steel fixings, a combination that stays smart with very little upkeep. The Type P's glass is to EN 12150.
Three support styles
Type G and Type K are carried on three brackets, with the Type K using gallows brackets; the Type P is supported by three tie rods from above for a lighter look under the glass.
Part of a compliant entrance
A canopy is one part of an accessible entrance. Approach routes, door widths, thresholds and landings all play a part too, so check the full requirements for your building with your designer or building control.
Frequently asked questions
How big are the DDA glass canopies?
They are 1200mm deep and 1500mm wide, with the Type P also made 1700mm wide. Made-to-measure sizes are available on request.
What's the difference between Type G, K and P?
They differ in how the glass is supported: Type G on three brackets, Type K on three gallows brackets, and Type P on three tie rods from above.
What glass do you use?
Toughened safety glass with stainless steel fixings. The Type P's glass is to EN 12150.
Does a canopy on its own make my entrance compliant?
No. A canopy helps, but compliance depends on the whole entrance, including approach, door, threshold and landing. Check the requirements for your building with your designer or building control.